Solution Graphics

Foodbuzz
Ask an Expert - Visit my Virtual Office at LivePerson
Showing posts with label birthday cake. Show all posts
Cowboy Cake

In this guide you will learn how to make edible sand/pebbles and add a buttercream transfer image to a cake.

To make this cake you will need...

1/2 sheet cake (2 layers)
1 foil covered cake board
frozen buttercream icing (brown, tan and red)
1 tube of black pre made icing.
basic buttercream icing (blue, red, green and brown)
graham cracker 'logs' or 'sticks'
cowboy image
tips # 1, 2, 3, and 5 (you will need at least 2 of each tip- except tip #1)


Directions:


Step 1

At least 1 day in advance, make your transfer image. Use our google search bar at the top to help you find a picture. For best results, search 'cowboy coloring pages' under Google Images.

Once you have your picture, use your frozen buttercream icing recipe, tips #1, 2 and 3 and follow our Frozen Buttercream Transfer Tutorial.


Step 2

Level, tort and fill your 1/2 sheet cake. Then, ice your cake with blue buttercream icing.

***Decorator's Tip*** When icing your cake, keep in mind that the lower half will be covered with 'sand.' By leaving mounds of icing, you will give the appearance of hills after the next step is completed.

Step 3

Line the sides of the cake with your graham cracker logs or sticks. Both will work so use what you can find. Crush the remaining graham crackers in a plastic Ziploc bag. Sprinkle the graham crackers along the bottom half of the cake to look like sand and pebbles.


Step 4

Place your frozen buttercream transfer on the cake. There are really no tricks needed here. Just make sure you peel your wax paper off slowly and place the image on before it thaws.


Step 5

Using tip #5 and green buttercream icing, pipe the large cactus on the cake. To make the cactus pop, pipe another layer of green icing on top using tip #3.

***Decorator's Tip*** It is very difficult to pipe on top of graham crackers but it is important to put them on first so they do not fall on top of the cacti as you sprinkle them. So, before you pipe the cacti, brush away the graham crackers with a decorator's brush. Once you have piped your cactus, push the crackers back with the brush. Have a toothpick handy just in case your icing lifts away from the cake as you are piping it.

Next, pipe the small cactus on the cake using the same concepts as above and tips # 3 then 2.


Step 6 (optional)

Using red buttercream icing and tip #5, pipe 'Happy Birthday' in the sky and your child's name in the sand. Next, pipe a lasso around 'Happy Birthday' using tip # 3 or 5 (depending on the size of your image) and brown buttercream icing. You can also pipe extra rope in the 'dirt.'
Read more »

In Labels: , , , , , , , on .

Photobucket

I made this Winnie-the-Pooh cake for my son's first birthday. It was very easy to make but I cannot take credit for this one. I purchased a cake kit complete with instructions, toppers, and even toys for my son. Below is a link to purchase the kit if you are interested in this cake. If you are looking for an easy kit similar to this one, check out the cake kit category at my online shop. There are kits for all ages from Sesame Street to Sports to Hannah Montana. However, not all of these kits will come with instructions. Look under our site's banner on how to order a Custom Cake Guide.


Read more »

In Labels: , , , , , , , , , , , , , , , , on .

Photobucket
There are 2 ways to make this cake. Below you will find my "novice" instructions, which uses a car shaped cake pan. If you are looking to carve your Lightning McQueen cake, "experienced" instructions are also available here.


To make the "novice" cake you will need...


3D Wilton Cruiser Pan
Large rectangular cake board
Tips # 2, 3 and 5
Red and black fondant
Red gumpaste
Thick Wire
Tan, white, orange, yellow, and black buttercream icing
Blue tinted piping gel
Crushed graham crackers
Rice Krispie Treats
Plastic cacti








Another item that will help decorate this cake is an airbrush. You will be able to cover the car in white fondant then airbrush it red. It will save you a great deal of time.









Directions for the "novice" cake:

****Please keep in mind that by using the cake mold listed above, your cake may not look exactly like Lightning McQueen because, while this mold gives you a car shape, it is not his exact shape.****


Step 1

A few days in advance, make the spoiler out of red gumpaste and place 4 thick wires
into the spoiler as it dries (the longer the better). These wires will hold the spoiler on the
cake.


Step 2

Bake the 3D Cruiser cake and freeze. To get the cake to look more like Lightning McQueen, you will need to trim cake off the top and possibly the hood to give it more of a curve.


Step 3

Once you are happy with the shape of the cake, ice the entire car with buttercream icing.


Step 4

Cover the cake with fondant. You can either cover the cake with red fondant or cover the cake with white fondant and airbrush the whole cake red.


Step 5

Use the white buttercream and tip #3 or 5 to pipe on the windows. 

****Decorator’s Tip**** Use a toothpick to outline all of the windows and the lightning bolt onto the car.


Step 6

Outline all of the windows with the black icing and tip # 2.


Step 7

Repeat the above two steps to pipe on the large lighting bolts, head lights, tail lights, and the large number on top, using yellow and orange or white buttercream (colors will depend on what you are piping).


Step 8

With tip #2 and black icing, pipe numbers on the sides of the car as well as the passenger side headlight and tail light.


Step 9

With tip #2 and yellow icing, pipe the child’s name to resemble the Rusteeze logo.


Step 10

With tip #2 and blue piping gel pipe on eyes. Be careful, as the piping gel will run if you use too much. Finally, add the pupil on the eyes with a small black dot.


Step 11

The only part that is left of the car is to make the wheels. To do this, cut circles out of Rice Krispie Treats and cover with black fondant. You can also cover with white fondant and airbrush them black. Add a red circle to the center of the wheel and pipe the word Lightyear onto the wheels. Once the car is sitting on the bottom cake you can place the wheels onto the cake. The exact size of the wheels will vary depending on the size of your wheel well. My wheels fit so snugly that I was able to place them into the well and they did not fall.


Step 12

Finally, bake, level and fill the 2 14x11 cakes. Place onto the large rectangular cake board and cover with tan icing. Next, sprinkle the crushed graham crackers on top to look like sand. Place 4 dowels into the cake to support the car. The placement of the dowels will depend on the placement of the car. Just be sure to use 2 dowels for the front of the car and two for the back.


Step 13

Place the wheels and spoiler onto the car and put the cacti onto the large cake.

****Decorator’s Tip**** If you are having trouble getting the spoiler to stay up you can take 4 lollipop sticks and place them behind the spoiler for support. Cover these sticks with black or gray buttercream. If you look at the original Lightning McQueen, you will see he has something similar on the back of his spoiler.
Read more »

In Labels: , , , , , , , , , , , , , on .



This is one of my favorite cakes and it was fairly easy to make. I think this would be a great cake for a beginner.


Photobucket






You will need.....



Round silver 12 inch cake board

1 8 inch round cardboard cake board

Wooden Dowels

Jungle animals

Diego topper or toy

Jungle tree toppers or toys

1 10 inch round cake

1 8 inch round cake

Light brown buttercream icing for covering cakes

Dark green, blue, and gray buttercream icing for piping

Wilton tips 3 (2 of them), 5, 20 or 21 (star tip), 233 (grass and hair tip), and 67 (leaf tip)







**Decorators Tip** Use couplers when piping on this cake. A coupler will allow you to change tips without changing piping bags.


Directions:


Step 1:

Level, tort, and fill cakes. Next, place the 10 inch cake along the back edge of the silver cake board and cover with light brown buttercream icing. Then, place the 8 inch cake on the cardboard cake board and cover with light brown buttercream icing but do not place on top of 10 inch cake yet.

Step 2:

Place 4 wooden dowels towards the back center of the 10 inch cake. You will need to stick the dowels in to measure, then take them out and cut to size. Once cut put them back into the cake. These will help support the top tier. **Place the dowels in a small circle, leaving a space in the center for the final dowel. **

Step 3:



Place the 8 inch cake on top of the 10 inch cake and dowels. As mentioned above, put the top tier towards the back of the cake so we are able to add the waterfall later.

Step 4:

With a toothpick, outline the shape of the waterfall and lake at the top. Once you are happy with the outline, pipe blue buttercream icing onto the cake with tip number 3 (make sure to use a coupler). To make the icing look like flowing water, take your spatula and make the icing uneven. Now change to the star tip and pipe the splashing water at the bottom of each tier.

Step 5:

Using your other tip 3 and a coupler, pipe green vines on the side of the cake. Then, change to your leaf tip and pipe leaves on the vines. Switch again to your grass tip and pipe grass around the edge of each cake and around the lake and waterfall.

Step 6:

With the gray buttercream icing and tip 5, pipe rocks around the lake and waterfall. Finally place the animals, Diego, and trees on the cake.

Read more »

In Labels: , , , , , , , , , on .